Cable detection method:
Important: Before the cable is tested, it must be checked whether the fixture is intact, the probe can not be skewed or the needle is retracted or extended too long to ensure that the test is performed normally and the terminal will not be damaged during the test. Do not savagely pull the cable when testing, to avoid damage to the cable. The unqualified cable shall be marked with red tape and placed on the special non-conforming product box or designated trailer, and delivered to the designated maintenance worker for repair. The appearance of the cable shall be checked one by one in one direction to avoid missing quality standards:
In the appearance of the cable processing, no tape head is rolled up or the tape shrinks and curls, and the cable is not allowed to be exposed until the glue is opened; when the electric inspection is passed, the computer will display the pass and the long beep sound prompt; the length of the cable and The position dimensions of each attachment are checked and accepted according to the following table.